Print
    2005 CATERPILLAR 246B Used Wheel Skid Steers for sale2005 CATERPILLAR 246B Used Wheel Skid Steers for sale
    Photos(1)

    2005 CATERPILLAR 246B

    $11,900 

    Seller Information

    View Seller Information

    Providence Equipment, LLC

    Contact:Sales

    Trinidad, Texas 75163

    visit our website

    General

    Year
    2005
    Manufacturer
    Model
    Hours
    3,000
    Serial Number
    CAT0246BAPAT03106
    Condition
    Used
    Description
    Machine Highlights Year: 2005 Make: Caterpillar Model: 246D3 OROPS Standard Flow Joystick Controls Manual Coupler Smooth Bucket 2 Speed Hours: 3000 SN: CAT0246BAPAT03106 Engine Gross Power - SAE J1995:2014 74.3 hp Net Power - SAE 1349 72.9 hp Displacement 203 in³ Stroke 4.7 in Bore 3.7 in Peak Torque - 1,500 rpm - SAE J1995 195 ft·lbf Engine Model Cat C3.3B DIT (turbo) Net Power - ISO 9249 73.7 hp Net Flywheel Power 72.9 hp Operating Specifications Rated Operating Capacity 2200 lb Tipping Load 4400 lb Breakout Force - Tilt Cylinder 7355 lb Rated Operating Capacity with Optional Counterweight 2410 lb Operating Weight 7478 lb Service Refill Capacities Chain Box - Each Side 3.3 gal (US) Cooling System 3.7 gal (US) Engine Crankcase 3 gal (US) Fuel Tank 27.7 gal (US) Hydraulic System 13.7 gal (US) Hydraulic Tank 10.3 gal (US) Hydraulic System Hydraulic Flow - Standard - Loader Hydraulic Pressure 3335 psi Hydraulic Flow - Standard - Loader Hydraulic Flow 23 gpm Power Train Travel Speed - Forward or Reverse - One Speed 7.7 mile/h Travel Speed - Forward or Reverse - Two Speed Option 11 mile/h Dimensions Wheel Base 49.2 in Height - Top of Cab 83.1 in Vehicle Width over Tires 66 in Ground Clearance 8.9 in Departure Angle 26° Maximum Dump Angle 39° Bumper Overhang - Behind Rear Axle 42.6 in Rack Back Angle - Maximum Height 96° Length - Without Bucket 117.8 in Maximum Overall Height 158.7 in Maximum Reach - With Arms Parallel to Ground 54.6 in Length - With Bucket on Ground 146 in Turning Radius from Center - Coupler 55.2 in Bucket Pin Height - Carry Position 7.9 in Bucket Pin Height - Maximum Lift 124.2 in Clearance at Maximum Lift and Dump 97.1 in Turning Radius from Center - Bucket 85.9 in Turning Radius from Center - Machine Rear 71.2 in Reach - Maximum Lift/Dump 23.6 in 2005 CATERPILLAR 246D3 OROPS STANDARD FLOW SKID STEER WITH JOYSTICK CONTROLS, MANUAL COUPLER, SMOOTH BUCKET, 2 SPEED, AND AN OPERATING WEIGHT OF 7,478LBS! SE HABLA ESPAÑOL! FINANCING AVAILABLE PLEASE CALL US WITH ANY QUESTIONS! ASK ABOUT OUR REASONABLE SHIPPING RATES!

    Category Specific

    Operating Capacity (50% of Tip)
    2,200 lb
    Operating Weight
    7,478 lb
    Tipping Load
    4,400 lb
    Standard Hydraulic Flow
    23 gpm

    Chassis

    Ground Clearance
    8.9 in

    Exterior

    ROPS
    Open

    Powertrain

    Two-Speed
    Yes
    Travel Speed
    7.7 mph
    Travel Speed - 2-Speed Option
    11 mph

    Weights & Dimensions

    Length w/o Bucket
    117.8 in
    Length with Bucket
    146 in
    Height to Top of ROPS
    158.7 in
    Width w/o bucket
    66 in

    Engine

    Horsepower
    72.9 HP

    Shipping Dimensions

    Shipping Length
    146 in
    Shipping Width
    66 in
    Shipping Height
    158.7 in
    Shipping Weight
    7,478 lb