DEISTER PORTABLE SCREEN 6'X20' TRIPLE DECK, HORIZONTAL SCREEN
PART OF COMPLETE 350 TPH CRUSHING & SCREENING PLANT
Item 1: Universal Wobbler Feeder - 75 hp electric motors
Item 2: Svedala 6'x16' 2 deck screen structure with 25 hp electric motor and steel chutes. Svedala 5x14 TDSH R PL-FLO 2 DECK SCREEN s/n 26A065 25 hp electric motor.
Item 3: Grasan Hazemag Primary port impact crusher APSE 1315, s/n KR1315e2950: A under crusher vibrating feeder, 300 HP Electric Motor, triple axle chassis, Six (6) hydraulic outriggers variable speed electric/hydraulic feeder discharge conveyor, 48:x18: long seco pan feeder.
Item 4: Deister Portable Screen 6'x20' Triple Deck Horizontal Screen s/n 2063P2911 40 HP, single axle with brakes, flop gates 42" fines conveyor.
Item 5: Caterpillar Diesel Powered 800 KW Generator, type EDR, 480 Volt 3 phase V12 Diesel in sea container operators Cab with structural stand and ladder.
Item 6: Grasan 12" Channel frame side discharge conveyor, 48"x56' long, Model 5548P, serial number 554PP2981, electric motors shaft mounted reducer idlers, 12" lagged head pulley, 12" wing tail pulley, heavy duty belt, collection hopper.
Item 7: Grasan Stacker conveyor, 36"x75' long, Model 3536P, s/n 753P2955; electric motor shaft mounted reducer, idlers, 12" lagged head pulley, 12" wing tail pulley, heavy duty belt, collection hopper.
Item 8: Grasan 12" channel frame return conveyor, 24: x 55' long, model 55245, s/n 552452954; electric motor, shaft mounted reducer, idlers, 12" lagged head pulley, 12" wing tail pulley, heavy duty belt, collection hopper.
Item 9: Grasan 12" channel frame transfer conveyor, 36" x 41' long, model 3536P, s/n 3536P3075; electric motor shaft mounted reducer, idlers, 12" lagged head pulley, 12" wing tail pulley, heavy duty belt, collection hopper.
Item 10: Grasan 24: x 60' x 24" truss conveyor with stand and all belting and components.
Item 11: Fuehauf 40 foot trailer with all contents.
Item 12: Ivertia 6'x18' Specmaker double deck screen high frequency screen.
Item 13: Quantity (10): 24"-30" wide 40'-50' transfer & stacking conveyors.
Item 14: One (1) - ISC Model 77-VSI Crusher
One (1) - ISC Rotable Anvil Ring Lifter Beam
One (1) - ISC Lube wiring package
Two (2) - 200 HP crusher duty electric drive motor, model WWE200-12-449TC
Item 15: One (1) Telemanique ATS48 Series 480 Volt, Three - phase Panel System, as described below:
* Soft-star with full voltage shorting starters and a branch breaker for two (2) 200 hp keypad display mounted in the door.
* Square D f.v.n.r. starters with thermals, branch breakers and lockouts for two (2) 10 hp and two (2) 2 hp motors.
* 1000 amp main breaker with a handle through the door to turn the power off and on. Phase monitor mounted in the panel to detect, single phasing, phase reversal or low voltage, to drop out the control circuits if there is a problem.
* 100-amp feeder breaker with a lockout for inertial panel. Plug and receptacle for this to feed power to the inertia panel.
* One (1) - Teco MA7200 A/C inverter & Breaker for a 25 hp motor (feeder motor 20 hp) and remote keypad mounting kit (for door installment).
* Control transformer with fusing sized both panels
* Control console to be mounted in an existing cab. The following is included:
One (1) illuminated emergency stop. Illuminated three position push-pulls for all starters in this panel, as well as ten (10) for starters and drives in the inertia panel.
Alarm start-up button, timer and relay. Alarm will be shipped loose with a weatherproof box, so that you can mount it in a desired location at the plant site.
- Potentiometer for the belt feeder. Shielded cable must be used for this to wire to the drive. Needs to be direct connected without a plug and receptacle.
- Red, green and amber pilot lights for miscellaneous signaling, warning, low flow, high temperature, etc.
- Amp meters for each the 200 hp motors.
- Hour meter
- Selector switches.
* Plug and receptacles for motors 20 hp and under.
* Plug and receptacles for control wires. One set between the console and main panel. One set between the main panel and the inertia panel and one set between the main panel and the VSI lube control panel.
* Nema 12 enclosure with fans, vents, feet and a sub panel, designed to be mounted inside.
* Control panel will be UL/CUL listed and include a copy of schematics and material list.
|Location||Isabela, Puerto Rico|